SmartMedia Card for Your Digital Camera

High Performance SmartMedia Card - TS128MVSSFDC

1 year warranty!

Click here for Shipping Rates.

• An embedded NAND-type Flash memory chip
• Rapid write and erase capabilities 
• Improved performance through continuous data recording 
• 8-bit I/O interface
• Serial page access: 50ns (minimum)
• 1-years Warranty
• Compatible With:
  AGFA
  Agfa E-Photo 1680
  EPSON
  Epson Photo PC 550
  OLYMPUS
  Olympus C Series
  C-1000L, C-1400L, C-1400XL,
  C-2000 Zoom, C-2020 Zoom, C-2500L
  C-3030 Zoom, C-420L, C-5050Z
  C-820L, C-840L, C-960 Zoom
  Olympus D Series
  D-220L, D-320L, D-340L/R,
  D-40 Zoom, D-400 Zoom,
  D-450 Zoom, D-460 Zoom,
  D-500L, D-600L, D-620L
  RICOH
  Ricoh RDC Series
  RDC-4200, RDC-4300, RDC-5000/B,
  RDC-5300, RDC-7/S
  SANYO
  Sanyo DSC Series
  DSC-V100, DSC-X1
  Sanyo VPC Series
  VPC-G250, VPC-X300, VPC-X350,
  VPC-X360, VPC-Z380, VPC-Z400
  TOSHIBA
  Toshiba PDR Series
  PDR-2, PDR-2A, PDR-5
  Toshiba PDR M Series
  PDR-M1, PDR-M3, PDR-M4,
  PDR-M5, PDR-M60, PDR-M70,
  PDR-M71
  SHARP
  Sharp VL-PD7
  Sharp EZ Series
  EZ1, EZ3, EZ5

Smart Media Cards are commonly used in devices such as faxes, printers, digital cameras, PDAs, game consoles, etc.This installation guide supports Transcend’s TS16MVSSFDC, TS32MVSSFDC, TS64MVSSFDC, and TS128MVSSFDC SmartMedia Cards.

Media Handling
In order to maximum the life and use of your SmartMedia Card, please follow these precautions:

1. Avoid bending or exposing the card to excessive heat.
2. Avoid storing the card in places with high humidity and/or static electricity.
3. Handle the card by its edge and avoid touching the metallic contact surface.
4. Do not remove the card while it is being used.

Installation Procedures
Please read the following instructions for general installation and usage of SmartMedia Cards. Refer to your device’s owner’s manual for specific issues.

1. Turn off the device.
2. Insert the storage card into the device. The storage card has a key notch preventing it from being improperly inserted.
3. The card should slide freely into the slot until it reachesthe bottom, at which point, you will feel some resistance.Check for obstructions if the card does not slide into the slot freely.
4. Installation is now complete.

Notes:

1. Write-Protection: Apply the metallic, adhesive write-protect sticker over the circular dot (B in the following illustration) to prevent recording over information you wish to archive.
2. Data Transfer: Your device(s) should be provided with all the necessary software and hardware to transfer information from the SmartMedia Card to your computer.
3. Format: Be careful! Do not re-format your SmartMedia card before usage.